MAXISIL Silicone Chart

Check out MAXISIL Silicone Chart, MAXISIL provides wide range of silicone for your next project including as below.

Maxisil P – the premium under water sealant

Maxisil P is designed for swimming pools, water fountains, public showers, gymnasium&all under water applications.

• For interior & exterior use.
• Easy to apply with good tooling properties
• Maxisil P shows an extreme resistance to mould formation.
• Has excellent adhesion to substrates where permanent water/wet stresses occur. Primer needs to be used.

Maxisil N – the premium natural stone sealant

Maxisil N is a non-staining neutral cure silicone designed for expansion joints in natural stone such as marble and granite.

• Can be used for interior and exterior areas.
• Maxisil N guarantees that there is no danger of migration of softeners or other components into the edge of the stone.
• Easy to apply with good tooling properties

Maxisil A – the premium wet area sealant

LATICRETE SPECTRALOCK PRO Premium Grout

• Maxisil A Ceramic Silicone is an acetic cure silicone recommended for all ceramic tile areas.
• Maxisil A is designed especially for expansion joints in sanitary areas such as bathrooms, kitchens and flooring sectors. It can be used for interior and exterior areas.
• With built in fungicides for mould resistance
• Can be used for both exterior and interior areas
• Excellent weather ability, resistant to ageing, UV radiation
• Resistant to chemicals and temperature
• Primerless adhesion to clean, dry surfaces such as ceramics, glass, acrylics, aluminium, painted wood with very good tooling and smoothing properties
• Time-saving with easy cleanup system

How To Use?

Cut the tip off tube square and the nozzle at 45°. Attach the nozzle and place the tube in gun. Place backer rods in joints, where required, to avoid excess wastage of silicone and to ensure silicone adheres to the two working surfaces. On both horizontal and vertical joints, be sure to trail the silicone behind the nozzle and fill the joint completely. With vertical joints start at the bottom working upwards. Apply only as much silicone as can be worked before skin form – usually up to 10 minutes, depending on the temperature.

 

Check out maxisil’s official website for full color range in here

MAXISIL P MAXISIL N MAXISIL A

*Please note that these Colour Guides are a representation and are to be used as a guide only.